The Terli off-grid solar power system ships as a complete, pre-matched BOM — 46 × 550Wp panels, a 30kW hybrid inverter, 30kWh of LiFePO4 storage, MPPT controller, mounting, cables, and accessories in a single order.
| Parameter | Value |
|---|---|
| Panel Type | Monocrystalline, Grade A |
| Peak Power | 550Wp per panel |
| Quantity | 46 units (25.3kWp total) |
| Module Efficiency | 21.3% |
| Vmp / Voc | 41.96V / 49.9V |
| Size | 2278 × 1134 × 35 mm |
| Weight | 28.6 kg |
| Warranty | 25 years |
| Parameter | Value |
|---|---|
| Rated Power | 30kW |
| MPPT Efficiency | Up to 97.6% |
| MPP Trackers | 4 |
| Max Parallel Units | 10 |
| Max Charge/Discharge | 100A |
| Protection | IP65 |
| Output | Pure sine wave, 110/120/220V AC ± 1% |
| Frequency | 50Hz / 60Hz (selectable) |
| Warranty | 5 years |
| Parameter | Value |
|---|---|
| Model | 51.2V 200Ah per unit |
| Energy per Unit | 10kWh |
| Standard Quantity | 3 units (30kWh total) |
| Cycle Life | > 6000 cycles (0.5C, 25°C, 80% DOD) |
| Max Discharge Current | 200A |
| Max Parallel Units | 64 |
| Warranty | 8 years |
Alternative: Gel battery 12V 200Ah, 1000 cycles @ 72% DOD, 6–8 year design life.
| Parameter | Value |
|---|---|
| MPPT Efficiency | ≥ 99.5% |
| Communication | Dual RS485, Bluetooth |
| Certifications | CE / RoHS / FCC |
| Parameter | Value |
|---|---|
| Material | Anodized aluminum + stainless steel |
| Wind Load | 55 m/s |
| Snow Load | 1.5 kN/m² |
| Angle | Adjustable |
| Compatible Roof Types | Slope, flat, ground |
PV combiner box, DC battery breaker, DC battery cable
6 mm² PV cables: 300 m
MC4 connectors: rated 1000V
Assembly tools included
The Terli 25kWh energy storage system ships in three configurations — off-grid, hybrid, and on-grid — so EPC contractors can match the right solution to each site’s grid access and budget.
Off-Grid — ~$11,500 USD
PV panels and LiFePO4 batteries supply all loads with no grid connection. The battery bank covers night use and cloudy-day power without any utility dependency. The right choice for rural electrification, island grids, and remote homes.
Hybrid Solar System — ~$12,500 USD
PV, battery, and grid work together. The system draws from solar first, stores surplus in the LiFePO4 bank, sells excess to the grid, and switches to utility when solar falls short. End customers get the lowest electricity cost and full backup protection in one unit.
On-Grid — ~$5,500 USD
No battery. PV feeds loads directly and exports surplus power to the grid. The lowest entry price for markets with reliable grid supply and net metering incentives.
| Configuration | Battery | Grid Tie | Price Reference |
|---|---|---|---|
| Off-Grid | Yes (LiFePO4 or Gel) | No | ~$11,500 USD |
| Hybrid | Yes (LiFePO4) | Yes | ~$12,500 USD |
| On-Grid | No | Yes | ~$5,500 USD |
All three configurations support RS485, WIFI, GPRS, Bluetooth, and app-based real-time monitoring. Output voltage and frequency are customized per market: 110/120/220V; 50Hz or 60Hz.
Each component in this off-grid solar power system meets professional-grade performance thresholds — the specs that determine whether a project runs for 30 years or generates warranty calls.
30kW Hybrid Inverter
MPPT efficiency up to 97.6% — maximizes PV harvest across variable irradiance conditions
4 independent MPP trackers prevent shading loss on one string from dragging down the array
Supports up to 10 units in parallel for on-grid and off-grid capacity expansion
Max charge/discharge current: 100A; 6 programmable time periods for battery scheduling
IP65 rated for outdoor installation; Germany brand IGBT in pure sine wave AC-DC-AC output
MPPT Solar Charge Controller
Charging efficiency ≥99.5%; intelligent mode with over-charge, over-discharge, and temperature protection
Dual RS485 communication; supports parallel connection for multi-controller arrays
LiFePO4 Solar Battery
6000 cycles at 0.5C, 25°C, 80% DOD — 15-year design life outperforms gel alternatives
Max 64 units in parallel; max discharge current 200A — scales to multi-hundred-kWh installations
Real-time cell monitoring and one-key app control via Bluetooth and WIFI
550Wp Monocrystalline Panel
Module efficiency 21.3%; wind load 2400 Pa, snow load 5400 Pa
PID resistant; high salt and ammonia resistance — built for coastal and agricultural sites
25-year power output warranty
The Terli 25kWh energy storage system carries the full certification stack distributors and EPC contractors need to import, sell, and install across North America, Europe, Australia, Africa, and Asia.
CE — Mandatory for EU market entry; covers electromagnetic compatibility and electrical safety
TUV (TUV NORD) — Independent component and system safety certification; required by European commercial buyers and project finance lenders
UL — North American safety standard; required by major US and Canadian distributors and utility interconnection programs
CEC — Clean Energy Council accreditation required for Australian government solar incentive eligibility
G98 / VDE — UK and Germany grid-connection standards for hybrid and on-grid configurations
CEI 0-21 — Italy grid interconnection standard
NRS / SC — South Africa and emerging-market grid compliance
ISO — Quality management system certification across production operations
MPPT controller: CE, RoHS, FCC — Covers controller-level compliance for radio interference and hazardous substances
The supplier holds Bureau Veritas audited status — an independent third-party supply chain inspection that validates manufacturing quality for buyers conducting supplier due diligence.
All certification documents are available on request. OEM-produced units qualify under the same framework — contact us for brand transfer details.
Terli eliminates the per-project engineering overhead that slows EPC contractors — from system sizing to on-site installation, the team operates as an extension of your project team.
1-Hour Design Turnaround
Submit a load profile and site details. Terli’s engineering team delivers a complete system design — panel layout, inverter sizing, battery bank configuration for off-grid, hybrid, or on-grid — within 1 hour. Large projects qualify for a dedicated site survey.
Mounting Design per Roof Type
The mounting system adapts to five installation types: home tile sloped roof, metal pitched roof, flat roof, parking canopy, and ground mount. Complete fittings ship with every order — no third-party hardware required.
Complete BOM, No Gaps
Every order ships with panels, inverter, LiFePO4 batteries, MPPT controller, mounting, PV cables (6 mm² × 300 m), MC4 connectors, combiner box, DC breaker, and assembly tools. No missing components, no last-minute local sourcing.
Production Visibility
Video inspection service during production lets buyers verify component quality before shipment — without travel.
Fast Execution
Shipment ready in as few as 7 days
On-site installation engineer available within 10 days of goods arriving at port
Follow-up service contact every 3 days during active project phases
The team has completed projects in 120+ countries, with regional code awareness built into every design proposal.
Terli backs every off-grid solar power system with the operational depth, warranty commitments, and post-delivery support that distributors need to protect their customer relationships.
Proven Manufacturer
11 years in solar energy — project knowledge reduces sizing errors and delivery risk for buyers
100+ global staff; 50% of the engineering team carries 11+ years of field experience
Bureau Veritas audited supplier — independent third-party verification of manufacturing processes
Alibaba.com quality and delivery guarantee — additional protection layer for new partnerships
Quality Before Shipment
Every system undergoes 100 power-off tests per hour before leaving the factory — a production QC standard that catches electrical faults before they become field failures.
Industry-Leading Warranties
| Component | Warranty |
|---|---|
| Solar panels | 25 years |
| Hybrid inverter | 5 years |
| LiFePO4 battery | 8 years |
| System design lifespan | 30+ years |
After-Sales Support
On-site engineer visits are available after installation. Remote support continues throughout the product lifespan — CE, TUV, and UL certified components back every claim.
Flexible Payment & Global Delivery
Payment: T/T, credit card, PayPal, Apple Pay, Google Pay, Western Union. Shipping: sea, air, express; home delivery service available; overseas warehouse stock in key markets.
Q1: What products do you offer?
Our main products is Lithium Ion Batteries. Now we can offer Home Energy Storage, Telecom Battery， Battery Pack，Lithium Battery 24V 48V etc.
Q2: How can I get a sample to check your quality?
If you need sample to test, please pay for the freight and sample cost. And the sample cost will be returned back to you after you place an bulk order more than our MOQ.
Q3: Can I have the products with my own logo?
Yes. We can offer both OEM and ODM service with prototype design and small MOQ.
Q4: How long can I expect to get the sample?
The samples will be ready for delivery in 3~5days after we receive the payment.
Q5:Can you give me a discount?
Yes, based on wholesale service, we have better discount for bigger quantities. We will quote you the best price based on your order quantity.
Q6. What are the advantages that distinguish from others?
1. Official cooperative supplier of China State Grid Official
2. With professional product development team
3. Rich experience in wireless computer room
4. With superior energy storage solution