[3 Years Lifetime] Our 12v LiFePO4 Battery provides 2000-5000 cycles, which is about 10 times more than 200-500 cycles of lead-acid battery, and its lifetime is 10 years, which is 3 times longer than lead-acid battery. Taking a long view, Lithium Battery saves money without multiple purchases.
[100% Safe] Our 12v 100Ah LiFePO4 Battery is built in BMS protection, which can perform cell balancing and protect the lithium battery from overcharge, over-discharge, overload, overheating, and short circuit and which is renewable environmental energy sources, completely replacement for lead-acid, AGM, or Gel batteries.
[Light Weight & Widely Used] 12V 100ah lithium iron phosphate battery weighs 3.3lbs only, which is 30% lighter than lead acid battery in the same capacity, which is convenient outdoor camping power supply and simple indoor installation. 12V 12Ah LiFePO4 battery (rechargeable) can be used for ride-on toys, lawn mower, UPS, ham radio and more.
[Extendible & Waterproof] Our 12v LiFePO4 Battery can be allowed to be extended up to 4 in series and 4 in parallel (Max 4S4P) to get more capacity (150Ah 200Ah 300Ah) and higher voltage (24V, 36V, 48V). which use IP65 waterproof craftsmanship and case, preventing it from water and providing excellent impact resistance.
The Terli 12V 100Ah LiFePO4 battery delivers precise electrical and mechanical parameters for energy storage procurement. This deep cycle battery uses Grade A lithium iron phosphate cells in a compact 12.16 kg enclosure.
Model |
12V |
||
Battery Type |
LiFe PO4 |
||
Battery Module |
TY-12-100 |
TY-12-150 |
TY-12-200 |
Battery Capacity (Ah) |
100 AH |
150AH |
200AH |
Nominal Battery Energy (kWh) |
1.2 |
1.8 |
2.4 |
Nominal Voltage (V) |
12.8V |
||
Nominal Output Current (A) |
50 |
75 |
100 |
Weight (Kg) |
12.16 |
15.5 |
18.9 |
Dimension (L*W*H mm) |
270*170*230 |
240*205*190 |
270*180*230 |
Package Dimension (L*W*H mm) |
310*210*270 |
280*245*230 |
310*220*280 |
Working Voltage (V) |
11.2-14.6 |
||
Operating Temp.Range (°C) |
-20~50 |
||
Calendar Life (Cycles) |
6000@25°C,80%DOD |
||
Protection Level |
IP54 |
||
Terminal |
Anderson Or Other |
||
Certification & Safety Standard |
TUV/CE/EN62619/IEC62040/UN38.3/CECAccredited |
||
Monitoring & Protection |
BMS |
||
The Terli 12V 100Ah LiFePO4 battery replaces lead-acid with measurable operational gains. This deep cycle battery delivers 4,000 to 6,000+ cycles against 200 to 500 for lead-acid equivalents. That 10+ year lifespan eliminates three to five replacement cycles.
At 12.16 kg, this lithium iron phosphate battery weighs 70% less than 135 lb lead-acid alternatives. The 5x energy density packs 1280Wh of usable 100% DoD capacity against 50% to 60% for lead-acid. Charging completes 2x to 5x faster.
Zero maintenance removes watering schedules and sulfation checks. The 1% to 3% monthly self-discharge rate preserves stored energy far longer than the 30% typical of lead-acid. These factors cut total ownership cost across the product lifespan.
The Terli 12V 100Ah LiFePO4 battery carries a 20+ layer BMS that protects every charge and discharge cycle. This marine battery meets global distribution standards with full certification documentation.
Overcharge and over-discharge protection: The BMS terminates current flow before cell damage occurs.
Overcurrent and short-circuit protection: Fault conditions trigger instant cutoff and recovery.
Temperature cut-off: Charging stops above 140F to 158F and below 23F to 41F. Discharging halts above 158F to 176F and below -13F to 5F.
Cell balancing: Active balancing maintains uniform voltage across all Grade A cells.
Certifications: UN38.3, CE, CB, FCC, TUV, EN62619, IEC62040, and CEC Accredited.
IP rating: IP54 dust and water resistance protects internal components in outdoor installs.
Every battery ships with certification copies for customs and channel partner audits.
The Terli 12V 100Ah LiFePO4 battery serves multiple high-growth verticals with reliable portable power. This RV solar battery runs LED lighting, inverters, and charge controllers in off-grid camping and travel trailer setups.
This marine battery powers trolling motors and bass boat electronics for full-day fishing trips. Home backup systems keep CPAP machines, WiFi routers, and lights running through 12-hour outages and hurricane seasons.
Solar installers pair it with rooftop panels for residential energy storage. Golf carts, forklifts, and communication base stations also draw consistent voltage from this 1280Wh pack. Every application benefits from the 22 lb weight and zero maintenance design.
The Terli 12V 100Ah LiFePO4 battery scales from single-unit installs to multi-battery energy banks. Series wiring builds 24V, 36V, or 48V systems for higher-voltage motor and inverter loads.
Parallel connections expand capacity to 12V 200Ah, 300Ah, or 400Ah. The maximum safe configuration reaches 4S4P for large commercial installs. Up to 16 units form a 20.48 kWh home backup array.
Installers can place the battery in any orientation. It accepts LiFePO4 chargers, solar charge controllers, and most lead-acid chargers without desulfate mode. The optimal charge current is 20A with a 50A maximum. A 60A to 100A circuit breaker protects trolling motor setups.
Terli brings 10+ years of energy storage R&D to every 12V 100Ah LiFePO4 battery order. The 8-stage production line covers outer box prep, cell preparation, assembly, testing, foam packing, carton packing, and wooden case packing.
Grade A LiFePO4 cells arrive with batch traceability and individual test records. The factory has shipped millions of units to 30+ countries. OEM and ODM partners receive custom labeling, packaging, and spec sheet adaptation.
Quality control documentation supports full factory audits. Media outlets including Yahoo, MSN, Business Insider, and CleanTechnica have recognized the product line. Multi-channel support teams answer inquiries within 24 hours.
Terli backs every 12V 100Ah LiFePO4 battery with a 10-year product warranty that matches the 10+ year cell lifespan. This alignment removes replacement risk for distributors and end users.
10-year product warranty: Covers defects in materials and workmanship across the full rated lifespan.
30-day return policy: Allows evaluation and quality verification before volume commitment.
Lifetime technical support: Expert teams handle integration questions via live chat and email.
24-hour response guarantee: All inquiries receive a technical answer within one business day.
Sample program: Evaluation units ship from California for hands-on testing before container orders.
Volume pricing tiers: Scaling orders unlock preferential rates for repeat container volumes.
Secure payment options and factory audit support streamline procurement from first contact to delivery.